© Copyright Nostre Net
PCB is a printed circuit board, an important electronic component, a support for electronic components, and a carrier for electrical connection of electronic components. Because it is made using electronic printing, control pcb board ，it is called a "printed" circuit board.
Function: After the electronic equipment adopts the printed board, due to the consistency of the same type of printed board, the error of manual wiring is avoided, and the automatic insertion or placement of electronic components, automatic welding and automatic detection can be realized, which guarantees the electronic equipment. quality, improve labor productivity, reduce costs, and facilitate maintenance.
like:
What are the classifications of circuit boards
1. The diameter of the grinding wheel chuck shall not be less than one third of the diameter of the grinding wheel to be installed.abrasive manufacturer，The diameter of the wheel chuck used for cutting off the wheel should not be less than one quarter of the diameter of the wheel to be installed.
2. For any form of grinding wheel chuck, the diameter of the left and right parts and the radial width of the pressing surface must be equal.
3. The surface of the grinding wheel chuck should be smooth, without sharp edges and well balanced.
4. All rotating parts on the grinding machine, such as: grinding wheel, motor, pulley and workpiece headstock, etc., must be equipped with protective covers. The protective cover should be firm, and its connection strength should not be lower than that of the protective cover.
like：
What is a grinding wheel and what are its characteristics
There are several commonly used grinding wheels
Dust and moisture proof
Many workshops have a lot of dust and material debris in the workshop due to equipment and materials.fanless industrial pc。 Therefore, when the factory purchases the industrial computer, it needs to check whether it has good dust-proof and moisture-proof performance.
solve
The use of industrial control computers is mainly to control production equipment. If the resolution is not enough, the graphics cannot be displayed clearly, and the judgment of the process flow and failure will be inaccurate.
heat dissipation
In order to better protect the industrial computer, the chassis is often sealed with thicker materials, but the temperature inside the chassis is not easy to dissipate. Therefore, when purchasing an industrial computer, it is necessary to understand the heat dissipation capacity of the computer.
like:
What are the advantages of a fanless computer host?
Daily inspection method of industrial computer。
Which parts of the industrial computer need to be cleaned?
High machining accuracy.
A pair of molds usually consists of a female mold, a male mold and a mold frame, some of which can be multi-piece split modules. cnc machining manufacturers ,Therefore, the combination of upper and lower molds, the combination of inserts and cavities, and the combination of modules all require high machining accuracy.
Complex shapes and surfaces.
Such as car panels, aircraft parts, toys and household appliances, the molding surface is composed of various curved surfaces, so the surface of the mold cavity is very complex. Some surfaces are processed through mathematical calculations.
Repeat production.
The mold has a long service life. When the service life of a pair of molds exceeds its lifespan, new molds need to be replaced, so the production of molds is often repeated.
like:
How to determine the right material for CNC machining.
1. First of all, it is necessary to understand whether the main structure of the mattress conforms to human mechanics, whether it can provide moderate support for the human body,wholesale mattress， and can maintain the most natural and comfortable state when lying down, without any pressure and reluctance.
2. Consider the size of the mattress. When buying a mattress, add 20cm to your personal height as the best size to provide room for your head, hands and feet to stretch.
3. Because everyone has different requirements for the hardness and elasticity of mattresses, especially the elderly should pay special attention to their sleeping habits. A mattress that is too soft tends to collapse, making it difficult to get out of bed. Therefore, it is recommended to choose a mattress with a higher firmness.
4. Relax and try to lie down and turn over in various positions, feel the contact and support of the mattress to various parts of the body, feel the touch and firmness of the mattress when you try to lie down.
like：
Features of individual pocket spring mattresses:
The role and efficacy of latex mattresses
Headphone anc means the headphones have noise cancelling. "ANC (Active Noise Cancellation)", or Active Noise Cancellation,anc headset， is a noise reduction technology and one of the methods used for noise reduction in headphones.
Headphones are a pair of conversion units that take electrical signals from a media player or receiver and convert them into audible sound waves using speakers close to the ear. Headphones can usually be detached from the media player and connected using a plug. The benefit is that one can listen to the sound without disturbing others; it can also isolate the sound of the surrounding environment, which is very helpful for those who use it in noisy environments such as studios, bars, travel, sports, etc.
Headphones were originally used for telephones and radios, but with the proliferation of portable electronic devices, headphones were mainly used in cell phones, walkmans, radios, portable video games, and digital audio players.
At present, the points that users are most concerned about include sound quality, battery life and wireless transmission capability. From the data point of view, the wireless transmission capability can basically meet the needs of most users, and there is still a lot of room for improvement in terms of sound quality and battery life. If you start from these two points to improve, I believe it will easily attract the attention of users in the future.
like:
How to choose ANC and ENC noise cancelling headphones?
What is the difference between anc and enc headphones?
What CNC machining centers and CNC lathes have in common is that CNC systems are installed on ordinary machine tools. custom machined parts，A lathe equipped with a CNC system is called a CNC lathe, a milling machine equipped with a CNC system is called a CNC milling machine, and a CNC milling machine is installed next to the CNC milling machine. If a tool magazine is installed, it is called a machining center.
The biggest difference between a CNC machining center and a CNC lathe is that the machining center can automatically change the machining tools. By installing tools for different purposes on the tool magazine, machining tools can be automatically changed in one clamping.
By installing different tools on the tool magazine, the machining tools on the spindle can be replaced with an automatic tool changer at one time to realize various machining functions. The workpiece of the machining center is clamped at one time, which can complete all the processes and ensure various precisions, while the CNC lathe only completes the processing of one process.
like:
Operation points of CNC machining center
How to solve CNC machining collision caused by programming.
The working principle of CNC machining of metal parts.
The nylon canvas strap material does not fully represent the essence of the NATO strap. The traditional NATO strap has the design of the main and secondary straps. There are several reasons for this design. One was improved from the inspiration of the machine gun belt. The other is the addition of auxiliary straps to strengthen the fixing effect,nato watch band ， and because the size of the auxiliary straps is designed to be longer, it can even be used by soldiers as emergency bandages in emergency situations.
Early NATO straps were welded with fixing rods and did not use detachable spring rods to fix the strap (this method can make the connection between the strap and the watch head stronger and not easy to fall off). As for some common NATO straps, it retains the traditional important concept, but also incorporates some new elements, such as adding a loop on the back of the case, and a non-slip clasp; so even if the strap is pulled, the watch is still It will not slip off easily, and when worn, it exudes a sense of dynamism that is different from traditional leather straps or metal bracelets.
like:
What are the characteristics of NATO nylon straps?
The basic meaning of OEM (Origin Entrusted Manufacture) is OEM production cooperation, commonly known as "OEM".
That is, brand producers do not directly produce products, but use their "key core technologies" to be responsible for the design and development of new products, oem screen,and to control sales and sales "channels". This cooperative way of entrusting others to produce is called OEM. Manufacturers who undertake this processing task are called OEMs, and the products they produce are OEM products.
ODM (Original Design Manufacturer) original design manufacturer.
The characteristics of OEM are: technology outside, capital outside, market outside, production inside. ODM (ie ORIGINAL DESIGN MANUFACTURER) means "Original Design Manufacturer" and refers to a company that designs and manufactures products to another company's specifications. They also typically specify specifications for major internal details of the product, such as the CPU or video controller.
like:
What is the difference between ODM and OEM
What is an external screen for a mobile phone?
The phone screen is separated from the fuselage
The environmental conditions of silicone products, over time, can cause cracking or hardening, and the physical properties of the silicone are degraded, called aging.Silicone molding products， What are the reasons for the aging of mold silicone products?
1. External factors: External factors include oxygen, oxides, ozone, heat, light, radiation, mechanical fatigue, insufficient processing, etc.
2. Internal factors: Internal factors include the type of silica gel, the molding method, the degree of adhesion, the type of drug, and factors in processing engineering.
To prevent aging, pay attention to the correct selection and formula design of silicone varieties, plus strict production concepts. Only in this way can the service life and special functions of silicone products be extended.
like：
What are the molding processes of silicone products?
How to adjust the solidification time of mold silicone?
Is food grade silicone transparent?