User blogs
Are you in search of selective information concerning water heater leaking?
How to Use a Plumber’s Snake A plumber’s snake, or drain auger, is a tool that reaches down into pipes to remove clog-causing blockage. Snakes make up the middle ground between common household plungers and the really big guns. If you’re dealing with a clog too stubborn for your plunger, then a snake is your best chance to clear it out yourself.
Snakes are much more powerful drain-clearers than plungers, but they’re also slightly riskier to use. If you use your plumber’s snake improperly, then you might tear up your pipes or even create leaks. To avoid doing that, it’s important to know how your snake works and how to use it correctly. Here’s everything you should know about using a plumber’s snake.
How does a plumber’s snake work?
what is a plumber's snake?A plumber’s snake is a long, flexible metal cable with a small auger or uncoiled spring on one end and a handle on the other. The auger on the snake looks like a drill bit or a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it. Most home plumber’s snakes are hand-operated, and probably have a rotatable handle or even a crank.
Plumber’s snakes work by entering the drain directly to physically contact and then clear away the obstruction causing the clog. You manually insert the auger end of the snake into the drain and then begin uncoiling by rotating the handle. As the snake uncoils, the auger moves further through the drain pipe, until it breaks through the obstruction.
How do you use a plumber’s snake?
1. Put on some clothes you don’t mind getting dirty and lay some old towels beneath the pipes you’re working on. Depending on the nature of the clog, your snaking procedure could get messy. This is especially important if you end up removing the p-trap.
2. (Optional) Consider removing the p-trap. The p-trap, or p-bend, is the curving piece of pipe beneath the sink. It connects the sink to the greater drain pipe system in your home. The reason it’s curved is to prevent sewer gases from rising through the sink and into the home. P-traps are often made of PVC pipe, though they can also be metal.
You can manually remove the p-trap, either with your hands or with the help of an adjustable wrench. Once you remove the p-trap, you should thoroughly inspect and clean it out. If you find your obstruction, then you won’t have to snake at all! Even if you don’t find anything, removing the trap could make snaking easier.
3. (Optional) Consider removing the trap arm. A trap arm is the part of the pipe between the p-trap and the actual wall pipe. It holds the p-trap in place and may curve again to reach the wall. Look for a plastic or metal nut connecting the trap arm to the wall. If you can find one, loosen it to remove the trap arm. If you can’t, then it’s possible the arm is glued in place; don’t attempt to remove it in that case. Make sure you clean out the trap arm like you did the p-trap once you remove it.
Removing the trap arm gets you as close to the drain pipe as possible. Look inside the drain pipe to look for any obstructions. If you can see the obstruction, try removing it from where you are. If you can’t, you should use your snake.
4. Manually thread the auger head of the snake into the pipe. Insert the head of the snake into either the drain (if you didn’t remove the trap), or the access point on the wall. If you didn’t remove the trap, consider running cold water while you snake.
Don’t force the auger into the drain too hard, or you could damage the drain entrance or pipe. Be patient and make sure the head and cable aren’t too long for the drain you’re trying to snake.
5. Begin uncoiling the snake using the handle. Keep the handle of the snake as close to the entrance of the pipe as possible. The more slack the auger had has, the less force you’re supplying it.
Rotate the handle at a consistent pace. Don’t try to rush it or rotate too slowly. If you feel pressure at any point while the cable moves through the pipe, you may have encountered the obstruction.
6. Upon reaching the obstruction, move the rotate the head back-and-forth and up-and-down. Try to break up the obstruction as thoroughly as possible. Don’t try to jam the auger into the walls of the pipe, however. If you hear scraping noises, then you should stop snaking and re-adjust.
If you think the auger might be stuck in the obstruction, consider pulling the snake out of the pipe. In some cases, the obstruction may come out with it. Continue snaking until you no longer feel resistance and the snake uncoils to its full length.
7. Pull the snake out and re-assemble the sink components. Check the auger head for remains of the obstruction and clean it off. If you removed the trap arm and p-trap, then you should re-install them at this point.
8. Check the sink. The snake should have successfully removed the obstruction and solved the clogging problem. If you still seem to have a clog, then you could try repeating your snaking process again. Just like plunging, however, snaking too much can harm your pipes or drains. If a thorough snaking really didn’t solve your problem, then you should consider calling in the pros.
Snaking is a surprisingly easy and accessible homeowner project. As long as you understand how to use your snake, you should solve your problem without creating new ones.
Sometimes, however, you may not be able to beat that clog, no matter what you try. Don’t despair! After your snake, the next step is to call Mike Diamond. We’ve got the tools and know how to find and break up any clog, no matter how stubborn.
https://mikediamondservices.com/blog/plumbers-snake-use/
Dependable Plumbers Offer Quality Workmanship The Finest Plumbers Are Well Known As professional Vancouver plumbers we are able to handle all your plumbing needs, which includes maintenance, leak repair, installations or all types of plumbing work in commercial and residential settings. Toilet, tub or tap… whatever your are looking for you can have faith in us to send out an accredited plumber to deal with it in an efficient and respectful manner. For fast service, call us today or click this link plumbing
Emergency Plumbing Potential tasks can run from the minor variety - for instance a dripping faucet - to more significant ones that are, or possibly could become, devastating. Our committed team of plumbers have got the skills, tools and experience to solve any kind of dilemma that you come upon, and they are experts at anything from resolving leaks to replacement piping.
We can swiftly resolve all kinds of plumbing problems that might cause concern in your home or commercial premises. For all your plumbing emergencies, get on the phone to us. We have a 24-7 emergency plumber available on call who'll be sent to you as quickly as is possible. Any time day or night, you can count on us for speedy and cooperative help in your time of need. We at Pioneer Plumbing know how upsetting plumbing problems tend to be, especially when it's an urgent situation out of regular business times.
All Sorts of Installations KCs Plumbing boasts a long standing history of top notch workmanship. Regardless if you want to get a bit of pipe insulation, or a brand new kitchen sink installed, or you are looking for an installation or re-pipe in a commercial or residential property, we've got the skills and practical experience to make certain it is done to code.
We are recognized also as a leader in upgrading the pipework in older houses, something that we have been working on for several years now, in particular in a lot of the striking homes.
Our dedicated commercial and residential plumbing service is the best choice for either modern homes or older homes.
As a fervent person who reads on sump pump installation, I assumed sharing that piece of content was worthwhile. Appreciated our blog posting? Please quickly share it. Help somebody else find it. Do you know about somebody else who is excited about the topic? Feel free to promote it. Sharing is nice. Helping others is fun. Thank you for your time. Kindly pay a visit to our blog back soon.
KCs Plumbing & Heating
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
Are you trying to find content involving household plumbing?
How to Get Rid of Air in Water Pipes Air in water pipes can lead to some odd sounds. If you are hearing prolonged vibrating or noises that you believe are coming from the water pipes, it may be air in your water pipes. Air in water pipes create noises that last for a while and are there when you haven't used your water recently. Follow these steps to release that annoying air from the water lines.
Step 1
Shut off the main water valve by turning it as far clockwise as it will go. In cooler climates this will normally be in the basement if you have one, or possibly in a closet. In warmer climates the water shut off valve may be on the outside of the house near the water meter.
Step 2
Open all faucets in your home. This will include the outdoor spigot, sink, washing machine, shower and every water connection you may have in your home. Flush all toilets until no more water is in the tank or toilet.This will ensure there is no more water in the home's water lines.
Step 3
Turn the main water supply back on once no more water is coming through any faucets. Do this by turning the main water valve as far as it will go counter clockwise. Allow the water to run until every faucet is no longer sputtering. Flush all toilets until they too have a steady flow of water.
Step 4
Turn the faucets off one by one once there is a steady flow of water coming from all of them. A steady flow of water means there is no longer any air in the water lines.
https://www.hunker.com/12335092/how-to-get-rid-of-air-in-water-pipes
Dependable Plumbers Offer Quality Workmanship The Best Plumbing Contractors Are Well Known We are a professional Vancouver plumbing company who can handle any of your home service needs, including routine maintenance, installations, repairing leaks or all types of work in commercial and residential environments. Tub, toilet or tap… whatever your need you can call on us to send a qualified plumber to deal with it in a considerate and efficient fashion. For dependable service, call right now or click on this link plumbing companies
Emergency Plumbing Repair services can vary from minor things - for instance a leaking faucet - to those that are, or could become, catastrophic. Our dedicated plumbers can offer the tools, skills and experience to solve any kind of challenge that crops up, and they are specialists at any plumbing project from troubleshooting leaks to new pipework.
We're able to swiftly fix any dilemmas with plumbing that may arise in your house or commercial premises. If you've got a plumbing emergency, please call us. We've continually got an emergency 24 hour plumber available on call who'll be sent to you ASAP. Any time day or night, you're able to depend on us for punctual and considerate support in your time of need. We appreciate just how traumatic plumbing problems tend to be, in particular if it is an unexpected emergency after regular business times.
Every Kind of Installation We a KCs Plumbing have got a lengthy standing for high quality workmanship. Whether you wish to have a bit of insulating pipe, or a nice new basin put in, or you need a re-piping or installation in a residential or commercial building, we have the know-how and practical experience to ensure it is completed to code.
We're well-known also as a leader in updating the pipework in older houses, something we've been achieving for a long time now, most noticably in the gorgeous houses.
Our residential and commercial plumbing service is a great choice for both older homes and contemporary homes.
Hopefully you liked our excerpt about leaking pipe. Thanks a ton for taking time to read our blog. Enjoyed our blog posting? Please share it. Let others find it. Are you aware of anybody else who is sincerely interested in emergency plumber? Please feel free to promote it. Sharing is nice. Helping people is fun. I value your readership. Thanks for taking the time to read it.
KCs Plumbing & Heating Ltd
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
Each person seems to have their own unique idea involving plumbing companies.What are your ideas regarding sewer cleanout?
How to Use a Plumber’s Snake A plumber’s snake, or drain auger, is a tool that reaches down into pipes to remove clog-causing blockage. Snakes make up the middle ground between common household plungers and the really big guns. If you’re dealing with a clog too stubborn for your plunger, then a snake is your best chance to clear it out yourself.
Snakes are much more powerful drain-clearers than plungers, but they’re also slightly riskier to use. If you use your plumber’s snake improperly, then you might tear up your pipes or even create leaks. To avoid doing that, it’s important to know how your snake works and how to use it correctly. Here’s everything you should know about using a plumber’s snake.
How does a plumber’s snake work?
what is a plumber's snake?A plumber’s snake is a long, flexible metal cable with a small auger or uncoiled spring on one end and a handle on the other. The auger on the snake looks like a drill bit or a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it. Most home plumber’s snakes are hand-operated, and probably have a rotatable handle or even a crank.
Plumber’s snakes work by entering the drain directly to physically contact and then clear away the obstruction causing the clog. You manually insert the auger end of the snake into the drain and then begin uncoiling by rotating the handle. As the snake uncoils, the auger moves further through the drain pipe, until it breaks through the obstruction.
How do you use a plumber’s snake?
1. Put on some clothes you don’t mind getting dirty and lay some old towels beneath the pipes you’re working on. Depending on the nature of the clog, your snaking procedure could get messy. This is especially important if you end up removing the p-trap.
2. (Optional) Consider removing the p-trap. The p-trap, or p-bend, is the curving piece of pipe beneath the sink. It connects the sink to the greater drain pipe system in your home. The reason it’s curved is to prevent sewer gases from rising through the sink and into the home. P-traps are often made of PVC pipe, though they can also be metal.
You can manually remove the p-trap, either with your hands or with the help of an adjustable wrench. Once you remove the p-trap, you should thoroughly inspect and clean it out. If you find your obstruction, then you won’t have to snake at all! Even if you don’t find anything, removing the trap could make snaking easier.
3. (Optional) Consider removing the trap arm. A trap arm is the part of the pipe between the p-trap and the actual wall pipe. It holds the p-trap in place and may curve again to reach the wall. Look for a plastic or metal nut connecting the trap arm to the wall. If you can find one, loosen it to remove the trap arm. If you can’t, then it’s possible the arm is glued in place; don’t attempt to remove it in that case. Make sure you clean out the trap arm like you did the p-trap once you remove it.
Removing the trap arm gets you as close to the drain pipe as possible. Look inside the drain pipe to look for any obstructions. If you can see the obstruction, try removing it from where you are. If you can’t, you should use your snake.
4. Manually thread the auger head of the snake into the pipe. Insert the head of the snake into either the drain (if you didn’t remove the trap), or the access point on the wall. If you didn’t remove the trap, consider running cold water while you snake.
Don’t force the auger into the drain too hard, or you could damage the drain entrance or pipe. Be patient and make sure the head and cable aren’t too long for the drain you’re trying to snake.
5. Begin uncoiling the snake using the handle. Keep the handle of the snake as close to the entrance of the pipe as possible. The more slack the auger had has, the less force you’re supplying it.
Rotate the handle at a consistent pace. Don’t try to rush it or rotate too slowly. If you feel pressure at any point while the cable moves through the pipe, you may have encountered the obstruction.
6. Upon reaching the obstruction, move the rotate the head back-and-forth and up-and-down. Try to break up the obstruction as thoroughly as possible. Don’t try to jam the auger into the walls of the pipe, however. If you hear scraping noises, then you should stop snaking and re-adjust.
If you think the auger might be stuck in the obstruction, consider pulling the snake out of the pipe. In some cases, the obstruction may come out with it. Continue snaking until you no longer feel resistance and the snake uncoils to its full length.
7. Pull the snake out and re-assemble the sink components. Check the auger head for remains of the obstruction and clean it off. If you removed the trap arm and p-trap, then you should re-install them at this point.
8. Check the sink. The snake should have successfully removed the obstruction and solved the clogging problem. If you still seem to have a clog, then you could try repeating your snaking process again. Just like plunging, however, snaking too much can harm your pipes or drains. If a thorough snaking really didn’t solve your problem, then you should consider calling in the pros.
Snaking is a surprisingly easy and accessible homeowner project. As long as you understand how to use your snake, you should solve your problem without creating new ones.
Sometimes, however, you may not be able to beat that clog, no matter what you try. Don’t despair! After your snake, the next step is to call Mike Diamond. We’ve got the tools and know how to find and break up any clog, no matter how stubborn.
https://mikediamondservices.com/blog/plumbers-snake-use/
Dependable Plumbers Provide Good Workmanship The Finest Plumbing Contractors Are Highly Regarded We are a professional Vancouver plumbing company who is able to take care of all of your home service needs, including new installation, repair of leaks, maintenance or any type of plumbing work in residential and commercial premises. Tap, tub or toilet… no matter what you need you can call on us to send a qualified plumber to deal with it in an efficient and polite manner. For quick service, call our office or click here plumbing companies
Emergency Plumbing Services Repair tasks can run from the minor variety - for example a leaking faucet - to more severe ones which are, or possibly may become, devastating. Our plumbers have the skills, experience and tools to take care of almost any predicament that you come upon, and they're specialists at pretty much everything from replacement piping to leak detection.
We are able to swiftly handle all sorts of plumbing issues that could arise in your home or commercial premises. For any plumbing emergencies, please contact us. We've got an emergency 24-7 plumber available on call who will be sent to your property ASAP. Any time of the day or year, you will be able to depend on us for attentive and punctual assistance in your time of need. We realize just how traumatic plumbing related issues are, especially when it is an urgent situation after regular working periods.
All Types of Installations KCs Plumbing has a long standing reputation for top quality work. Regardless if you'd like to get some pipe insulation, or a nice new kitchen sink installed, or you are looking for an installation or a full re-pipe in a commercial or residential building, we have the ability and on-site experience to make sure that any work is accomplished to code.
We are well-known also as leaders in upgrading plumbing systems in old properties, a thing that we have been achieving for many years, in particular in some of the gorgeous houses.
Our terrific residential and commercial plumbing service is a sensible choice for both contemporary homes and heritage properties.
We had been introduced to that article on residential plumbing from an associate on our other web property. Appreciated our content? Please share it. Help others discover it. Are you aware of another person who is inquisitive about the subject? Why not promote it. Sharing is good. You never know, you could be doing someone a favor. Thank you for being here. Revisit us soon.
KCs Plumbing and Heating Ltd
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
Are you currently trying to locate info involving 24 hour plumbers near me?
How to Get Rid of Air in Water Pipes Air in water pipes can lead to some odd sounds. If you are hearing prolonged vibrating or noises that you believe are coming from the water pipes, it may be air in your water pipes. Air in water pipes create noises that last for a while and are there when you haven't used your water recently. Follow these steps to release that annoying air from the water lines.
Step 1
Shut off the main water valve by turning it as far clockwise as it will go. In cooler climates this will normally be in the basement if you have one, or possibly in a closet. In warmer climates the water shut off valve may be on the outside of the house near the water meter.
Step 2
Open all faucets in your home. This will include the outdoor spigot, sink, washing machine, shower and every water connection you may have in your home. Flush all toilets until no more water is in the tank or toilet.This will ensure there is no more water in the home's water lines.
Step 3
Turn the main water supply back on once no more water is coming through any faucets. Do this by turning the main water valve as far as it will go counter clockwise. Allow the water to run until every faucet is no longer sputtering. Flush all toilets until they too have a steady flow of water.
Step 4
Turn the faucets off one by one once there is a steady flow of water coming from all of them. A steady flow of water means there is no longer any air in the water lines.
https://www.hunker.com/12335092/how-to-get-rid-of-air-in-water-pipes
Dependable Plumbers Offer Good Workmanship The Finest Plumbers Are Well Recognized We are a full service plumbing company who is able to take care of all of home or business service needs, which includes leak repair, routine maintenance, new installations and all sorts of work in residential and commercial settings. Tap, tub or toilet… whatever it is you are looking for you can trust us to send a certified plumber to handle everything in a courteous and competent fashion. For honest service, call us today or click here plumbing repair
Emergencies Repairs can vary from minor issues - such as a dripping tap - to more significant ones which are, or could become, disastrous. Our dedicated team of plumbers have got the tools, skills and experience to resolve just about any problem that you encounter, and they're experts at pretty much everything from pipe installations to leak identification.
We are able to quickly remedy all sorts of plumbing issues which may occur at your house or commercial property. For any plumbing emergencies, please call us. We've always got a 24-7 emergency plumber available on call and will dispatch to your property as swiftly as is possible. Any time day or night, you can depend on us for punctual and patient help in any emergency. We realize exactly how traumatic plumbing issues are, particularly when it is an emergency after the regular working day.
Every Type of Installation KCs Plumbing is proud of its long standing history of good quality workmanship. No matter whether you need to get a bit of pipe insulation, or a brand new bathroom sink put in, or you are looking for a re-pipe or installation in a residential or commercial building, we have the expertise and the on-site experience to make certain any work is done correctly.
We're furthermore a recognized leader for replacing the piping in older properties, something that we have been working on for quite a while, especially in the numerous stunning houses.
Our commercial and residential plumbing service is the best choice for either modern homes or older homes.
As a passionate person who reads about hot water tank installation, I think sharing that excerpt was a good idea. Liked our review? Please share it. Help other people check it out. Are you aware of somebody else who is fascinated by the topic? Feel free to share it. Sharing is good. Who knows, you might be helping someone out. I thank you for your readership. Thanks so much for your time spent reading it.
KCs Plumbing & Heating
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
The writer is making a number of great annotation on plumbing and heating overall in this content just below.
How to Use a Plumber’s Snake A plumber’s snake, or drain auger, is a tool that reaches down into pipes to remove clog-causing blockage. Snakes make up the middle ground between common household plungers and the really big guns. If you’re dealing with a clog too stubborn for your plunger, then a snake is your best chance to clear it out yourself.
Snakes are much more powerful drain-clearers than plungers, but they’re also slightly riskier to use. If you use your plumber’s snake improperly, then you might tear up your pipes or even create leaks. To avoid doing that, it’s important to know how your snake works and how to use it correctly. Here’s everything you should know about using a plumber’s snake.
How does a plumber’s snake work?
what is a plumber's snake?A plumber’s snake is a long, flexible metal cable with a small auger or uncoiled spring on one end and a handle on the other. The auger on the snake looks like a drill bit or a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it. Most home plumber’s snakes are hand-operated, and probably have a rotatable handle or even a crank.
Plumber’s snakes work by entering the drain directly to physically contact and then clear away the obstruction causing the clog. You manually insert the auger end of the snake into the drain and then begin uncoiling by rotating the handle. As the snake uncoils, the auger moves further through the drain pipe, until it breaks through the obstruction.
How do you use a plumber’s snake?
1. Put on some clothes you don’t mind getting dirty and lay some old towels beneath the pipes you’re working on. Depending on the nature of the clog, your snaking procedure could get messy. This is especially important if you end up removing the p-trap.
2. (Optional) Consider removing the p-trap. The p-trap, or p-bend, is the curving piece of pipe beneath the sink. It connects the sink to the greater drain pipe system in your home. The reason it’s curved is to prevent sewer gases from rising through the sink and into the home. P-traps are often made of PVC pipe, though they can also be metal.
You can manually remove the p-trap, either with your hands or with the help of an adjustable wrench. Once you remove the p-trap, you should thoroughly inspect and clean it out. If you find your obstruction, then you won’t have to snake at all! Even if you don’t find anything, removing the trap could make snaking easier.
3. (Optional) Consider removing the trap arm. A trap arm is the part of the pipe between the p-trap and the actual wall pipe. It holds the p-trap in place and may curve again to reach the wall. Look for a plastic or metal nut connecting the trap arm to the wall. If you can find one, loosen it to remove the trap arm. If you can’t, then it’s possible the arm is glued in place; don’t attempt to remove it in that case. Make sure you clean out the trap arm like you did the p-trap once you remove it.
Removing the trap arm gets you as close to the drain pipe as possible. Look inside the drain pipe to look for any obstructions. If you can see the obstruction, try removing it from where you are. If you can’t, you should use your snake.
4. Manually thread the auger head of the snake into the pipe. Insert the head of the snake into either the drain (if you didn’t remove the trap), or the access point on the wall. If you didn’t remove the trap, consider running cold water while you snake.
Don’t force the auger into the drain too hard, or you could damage the drain entrance or pipe. Be patient and make sure the head and cable aren’t too long for the drain you’re trying to snake.
5. Begin uncoiling the snake using the handle. Keep the handle of the snake as close to the entrance of the pipe as possible. The more slack the auger had has, the less force you’re supplying it.
Rotate the handle at a consistent pace. Don’t try to rush it or rotate too slowly. If you feel pressure at any point while the cable moves through the pipe, you may have encountered the obstruction.
6. Upon reaching the obstruction, move the rotate the head back-and-forth and up-and-down. Try to break up the obstruction as thoroughly as possible. Don’t try to jam the auger into the walls of the pipe, however. If you hear scraping noises, then you should stop snaking and re-adjust.
If you think the auger might be stuck in the obstruction, consider pulling the snake out of the pipe. In some cases, the obstruction may come out with it. Continue snaking until you no longer feel resistance and the snake uncoils to its full length.
7. Pull the snake out and re-assemble the sink components. Check the auger head for remains of the obstruction and clean it off. If you removed the trap arm and p-trap, then you should re-install them at this point.
8. Check the sink. The snake should have successfully removed the obstruction and solved the clogging problem. If you still seem to have a clog, then you could try repeating your snaking process again. Just like plunging, however, snaking too much can harm your pipes or drains. If a thorough snaking really didn’t solve your problem, then you should consider calling in the pros.
Snaking is a surprisingly easy and accessible homeowner project. As long as you understand how to use your snake, you should solve your problem without creating new ones.
Sometimes, however, you may not be able to beat that clog, no matter what you try. Don’t despair! After your snake, the next step is to call Mike Diamond. We’ve got the tools and know how to find and break up any clog, no matter how stubborn.
https://mikediamondservices.com/blog/plumbers-snake-use/
Good Plumbing Starts With Reputable Service We are a professional Vancouver plumbing company who is able to take on all your home or business needs, including the likes of fixing leaks, maintenance, new installation and all kinds of work in residential and commercial settings. Tub, toilet or tap… whatever it is you require you can call on us to send out an accredited plumber to handle everything in a polite and efficient manner. For quick service, call right now or click this link plumbing company
Emergency Plumbing Services Repairs can vary from modest things - like a leaking tap - to more serious ones which are, or possibly might become, disastrous. Our professional team of plumbers can offer the experience, skills and tools to remedy any problem that you run into, and they are specialists at everything from leak identification to re-piping.
We can quickly remedy any problems with plumbing that may arise at your house or commercial premises. For any plumbing emergencies, please contact us. We've invariably got a 24-7 emergency plumber on call and will dispatch to you as swiftly as is possible. Any time of the day or year, you will be able to trust in us for attentive and prompt support in your time of need. We realize how worrying plumbing issues can be, particularly when it is an emergency outside of the normal business day.
All Types of Plumbing Installations We a KCs Plumbing have a long standing reputation for top quality work. Irrespective of whether you wish to have a new sink or some insulating pipe put in, or you need an installation or re-pipe in a residential or commercial property, we have the skills and working experience to ensure all jobs are accomplished correctly.
We are furthermore an acknowledged leader for updating the pipework in older properties, a thing we've been working at for a long time, in particular in a lot of the splendid properties.
Our quality residential and commercial plumbing service is the best option for both contemporary homes and older properties.
As an avid person who reads on water heater replacement, I think sharing that segment was worthwhile. Enjoyed our blog? Please share it. Let others find it. Do you know another person who is fascinated by the subject? Why not share it. Sharing is good. Helping others is fun. I am grateful for your time. Don't hesitate to visit our website back soon.
KCs Plumbing & Heating Ltd
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
Just about every person will have their own unique idea involving 24 hour plumber.What are your ideas on emergency plumbing service?
How to Use a Plumber’s Snake A plumber’s snake, or drain auger, is a tool that reaches down into pipes to remove clog-causing blockage. Snakes make up the middle ground between common household plungers and the really big guns. If you’re dealing with a clog too stubborn for your plunger, then a snake is your best chance to clear it out yourself.
Snakes are much more powerful drain-clearers than plungers, but they’re also slightly riskier to use. If you use your plumber’s snake improperly, then you might tear up your pipes or even create leaks. To avoid doing that, it’s important to know how your snake works and how to use it correctly. Here’s everything you should know about using a plumber’s snake.
How does a plumber’s snake work?
what is a plumber's snake?A plumber’s snake is a long, flexible metal cable with a small auger or uncoiled spring on one end and a handle on the other. The auger on the snake looks like a drill bit or a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it. Most home plumber’s snakes are hand-operated, and probably have a rotatable handle or even a crank.
Plumber’s snakes work by entering the drain directly to physically contact and then clear away the obstruction causing the clog. You manually insert the auger end of the snake into the drain and then begin uncoiling by rotating the handle. As the snake uncoils, the auger moves further through the drain pipe, until it breaks through the obstruction.
How do you use a plumber’s snake?
1. Put on some clothes you don’t mind getting dirty and lay some old towels beneath the pipes you’re working on. Depending on the nature of the clog, your snaking procedure could get messy. This is especially important if you end up removing the p-trap.
2. (Optional) Consider removing the p-trap. The p-trap, or p-bend, is the curving piece of pipe beneath the sink. It connects the sink to the greater drain pipe system in your home. The reason it’s curved is to prevent sewer gases from rising through the sink and into the home. P-traps are often made of PVC pipe, though they can also be metal.
You can manually remove the p-trap, either with your hands or with the help of an adjustable wrench. Once you remove the p-trap, you should thoroughly inspect and clean it out. If you find your obstruction, then you won’t have to snake at all! Even if you don’t find anything, removing the trap could make snaking easier.
3. (Optional) Consider removing the trap arm. A trap arm is the part of the pipe between the p-trap and the actual wall pipe. It holds the p-trap in place and may curve again to reach the wall. Look for a plastic or metal nut connecting the trap arm to the wall. If you can find one, loosen it to remove the trap arm. If you can’t, then it’s possible the arm is glued in place; don’t attempt to remove it in that case. Make sure you clean out the trap arm like you did the p-trap once you remove it.
Removing the trap arm gets you as close to the drain pipe as possible. Look inside the drain pipe to look for any obstructions. If you can see the obstruction, try removing it from where you are. If you can’t, you should use your snake.
4. Manually thread the auger head of the snake into the pipe. Insert the head of the snake into either the drain (if you didn’t remove the trap), or the access point on the wall. If you didn’t remove the trap, consider running cold water while you snake.
Don’t force the auger into the drain too hard, or you could damage the drain entrance or pipe. Be patient and make sure the head and cable aren’t too long for the drain you’re trying to snake.
5. Begin uncoiling the snake using the handle. Keep the handle of the snake as close to the entrance of the pipe as possible. The more slack the auger had has, the less force you’re supplying it.
Rotate the handle at a consistent pace. Don’t try to rush it or rotate too slowly. If you feel pressure at any point while the cable moves through the pipe, you may have encountered the obstruction.
6. Upon reaching the obstruction, move the rotate the head back-and-forth and up-and-down. Try to break up the obstruction as thoroughly as possible. Don’t try to jam the auger into the walls of the pipe, however. If you hear scraping noises, then you should stop snaking and re-adjust.
If you think the auger might be stuck in the obstruction, consider pulling the snake out of the pipe. In some cases, the obstruction may come out with it. Continue snaking until you no longer feel resistance and the snake uncoils to its full length.
7. Pull the snake out and re-assemble the sink components. Check the auger head for remains of the obstruction and clean it off. If you removed the trap arm and p-trap, then you should re-install them at this point.
8. Check the sink. The snake should have successfully removed the obstruction and solved the clogging problem. If you still seem to have a clog, then you could try repeating your snaking process again. Just like plunging, however, snaking too much can harm your pipes or drains. If a thorough snaking really didn’t solve your problem, then you should consider calling in the pros.
Snaking is a surprisingly easy and accessible homeowner project. As long as you understand how to use your snake, you should solve your problem without creating new ones.
Sometimes, however, you may not be able to beat that clog, no matter what you try. Don’t despair! After your snake, the next step is to call Mike Diamond. We’ve got the tools and know how to find and break up any clog, no matter how stubborn.
https://mikediamondservices.com/blog/plumbers-snake-use/
Good Plumbers Provide Good Work The Greatest Plumbers Are Well Known As professional plumbers we're able to sort out all your home or business needs, including leak repair, new installations, routine maintenance and any type of plumbing work in residential and commercial properties. Toilet, tap or tub… whatever your are looking for you can call on us to send out a qualified plumber to take care of things in an efficient and respectful fashion. For dependable service, call right now or click here plumbing services
Emergency Plumbing Solutions Repairs can run from the minor variety - such as a dripping tap - to those which are, or might become, catastrophic. Our committed plumbers can offer the skills, tools and experience to take care of just about any obstacle that you experience, and they're experts at anything from leak troubleshooting to re-piping.
We can immediately remedy any sort of plumbing dilemma which may occur at your home or business premises. For any plumbing emergencies, get on the phone to us. We've got an emergency 24-7 plumber available who will be dispatched to your premises as soon as is possible. Regardless of what the time of day or year, you can depend on us for patient and speedy support in your time of need. We realize exactly how traumatic plumbing issues can be, in particular when it's an urgent situation out of regular business hours.
All Kinds of Plumbing Installations KCs Plumbing boasts a long standing for top quality workmanship. No matter if you want to get a nice new basin or a bit of insulating pipe put in, or you need a complete re-pipe or installation in a commercial or residential property, we have the know-how and practical experience to ensure it is done correctly.
We are furthermore an established leader for modernizing the piping in old properties, a thing we have been achieving for many years, especially in the numerous splendid homes.
Our commercial and residential plumbing service is a sensible choice for either modern homes or heritage homes.
I stumbled upon that page about emergency plumber near me when perusing the internet. Enjoyed reading our post? Please quickly share it. Let somebody else locate it. Do you know about another person who is involved in the topic? Take a moment to promote it. Sharing is caring. You never know, you will be doing someone a favor. I take joy in your readership. Thank-you for going through it.
KCs Plumbing and Heating
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
Do you find yourself hunting for additional info on water heater replacement?
How to Use a Plumber’s Snake A plumber’s snake, or drain auger, is a tool that reaches down into pipes to remove clog-causing blockage. Snakes make up the middle ground between common household plungers and the really big guns. If you’re dealing with a clog too stubborn for your plunger, then a snake is your best chance to clear it out yourself.
Snakes are much more powerful drain-clearers than plungers, but they’re also slightly riskier to use. If you use your plumber’s snake improperly, then you might tear up your pipes or even create leaks. To avoid doing that, it’s important to know how your snake works and how to use it correctly. Here’s everything you should know about using a plumber’s snake.
How does a plumber’s snake work?
what is a plumber's snake?A plumber’s snake is a long, flexible metal cable with a small auger or uncoiled spring on one end and a handle on the other. The auger on the snake looks like a drill bit or a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it. Most home plumber’s snakes are hand-operated, and probably have a rotatable handle or even a crank.
Plumber’s snakes work by entering the drain directly to physically contact and then clear away the obstruction causing the clog. You manually insert the auger end of the snake into the drain and then begin uncoiling by rotating the handle. As the snake uncoils, the auger moves further through the drain pipe, until it breaks through the obstruction.
How do you use a plumber’s snake?
1. Put on some clothes you don’t mind getting dirty and lay some old towels beneath the pipes you’re working on. Depending on the nature of the clog, your snaking procedure could get messy. This is especially important if you end up removing the p-trap.
2. (Optional) Consider removing the p-trap. The p-trap, or p-bend, is the curving piece of pipe beneath the sink. It connects the sink to the greater drain pipe system in your home. The reason it’s curved is to prevent sewer gases from rising through the sink and into the home. P-traps are often made of PVC pipe, though they can also be metal.
You can manually remove the p-trap, either with your hands or with the help of an adjustable wrench. Once you remove the p-trap, you should thoroughly inspect and clean it out. If you find your obstruction, then you won’t have to snake at all! Even if you don’t find anything, removing the trap could make snaking easier.
3. (Optional) Consider removing the trap arm. A trap arm is the part of the pipe between the p-trap and the actual wall pipe. It holds the p-trap in place and may curve again to reach the wall. Look for a plastic or metal nut connecting the trap arm to the wall. If you can find one, loosen it to remove the trap arm. If you can’t, then it’s possible the arm is glued in place; don’t attempt to remove it in that case. Make sure you clean out the trap arm like you did the p-trap once you remove it.
Removing the trap arm gets you as close to the drain pipe as possible. Look inside the drain pipe to look for any obstructions. If you can see the obstruction, try removing it from where you are. If you can’t, you should use your snake.
4. Manually thread the auger head of the snake into the pipe. Insert the head of the snake into either the drain (if you didn’t remove the trap), or the access point on the wall. If you didn’t remove the trap, consider running cold water while you snake.
Don’t force the auger into the drain too hard, or you could damage the drain entrance or pipe. Be patient and make sure the head and cable aren’t too long for the drain you’re trying to snake.
5. Begin uncoiling the snake using the handle. Keep the handle of the snake as close to the entrance of the pipe as possible. The more slack the auger had has, the less force you’re supplying it.
Rotate the handle at a consistent pace. Don’t try to rush it or rotate too slowly. If you feel pressure at any point while the cable moves through the pipe, you may have encountered the obstruction.
6. Upon reaching the obstruction, move the rotate the head back-and-forth and up-and-down. Try to break up the obstruction as thoroughly as possible. Don’t try to jam the auger into the walls of the pipe, however. If you hear scraping noises, then you should stop snaking and re-adjust.
If you think the auger might be stuck in the obstruction, consider pulling the snake out of the pipe. In some cases, the obstruction may come out with it. Continue snaking until you no longer feel resistance and the snake uncoils to its full length.
7. Pull the snake out and re-assemble the sink components. Check the auger head for remains of the obstruction and clean it off. If you removed the trap arm and p-trap, then you should re-install them at this point.
8. Check the sink. The snake should have successfully removed the obstruction and solved the clogging problem. If you still seem to have a clog, then you could try repeating your snaking process again. Just like plunging, however, snaking too much can harm your pipes or drains. If a thorough snaking really didn’t solve your problem, then you should consider calling in the pros.
Snaking is a surprisingly easy and accessible homeowner project. As long as you understand how to use your snake, you should solve your problem without creating new ones.
Sometimes, however, you may not be able to beat that clog, no matter what you try. Don’t despair! After your snake, the next step is to call Mike Diamond. We’ve got the tools and know how to find and break up any clog, no matter how stubborn.
https://mikediamondservices.com/blog/plumbers-snake-use/
Good Plumbers Offer Good Work The Finest Plumbing Contractors Are Well Known As a full-service, professional Vancouver plumbing company we are able to tackle all of your plumbing needs, which includes new installations, maintenance, repair of leaks and any type of plumbing work in residential and commercial environments. Toilet, tub or tap… whatever it is you require you can call on us to send out an authorized plumber to handle everything in a considerate and competent fashion. For honest service, call right now or click this link plumbing services
Emergency Plumbing Services Repairs can vary from modest jobs - for instance a leaky tap - to major ones which are, or might become, catastrophic. Our dedicated plumbers have got the tools, skills and experience to remedy any sort of challenge that you run across, and they're experts at pretty much anything from pipework installations to leak detection.
We're able to immediately resolve any plumbing issues which may cause concern at your home or business. For any plumbing emergency, get on the phone to us. We have an emergency 24 hour plumber on call and will dispatch to your premises in Vancouver as soon as possible. Any time of the day or year, you'll be able to trust in us for fast and patient support in any emergency. We at Pioneer Plumbing recognise exactly how annoying plumbing problems are, especially when it's an unexpected emergency out of the normal working day.
Installations of All Types KCs Plumbing boasts a long standing reputation for top notch workmanship. Regardless if you wish to get a new kitchen sink or a bit of pipe insulation installed, or you require a re-piping or installation in a commercial or residential building, we have the knowledge and the on-site experience to be certain all jobs are carried out correctly.
We're also an established leader for replacing the pipework in older houses, something we have been working on for quite a while, in particular in the many stunning properties.
Our dedicated residential and commercial plumbing service is the top choice for either contemporary homes or older homes.
I stumbled upon that piece on burst pipe while browsing on the internet. If you enjoyed our post if you please be sure to pass it around. Feel free to take the opportunity to promote this entry if you appreciated it. Many thanks for your time. Revisit us soon.
KCs Plumbing and Heating Ltd
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
They are making a few great pointers relating to leaking pipe in general in this article following next.
14 Toilet Problems You’ll Regret Ignoring If you spot these troubles with your toilet, don't wait around for them to go away.
Running Toilet The mysteries of a running toilet can drive you nuts. Whether you hear water running constantly or cycling on and off, we’ll help you decipher the clues so you can stop wasting water. Hardware stores and home centers carry the parts for almost all toilet repairs. One cause of a toilet running is a flapper that doesn’t seal. If water from the tank seeps around the flapper and into the bowl, the flapper is probably shot.
Flush the toilet and look for a fill valve leak. Lift up on the toilet float arm when the tank is filling to see if the water stops. Bend or adjust the toilet float arm so the tank stops filling when the water level is 1/2- to 1-in. below the top of the overflow pipe. If the fill valve still leaks, replace it. Find out more about how to fix a running toilet.
Rocking Toilet If your toilet isn’t solidly fastened to the floor, there may be trouble in your future. Any movement of the toilet damages the wax seal. That leads to leaks and ultimately major repairs. To steady a rocking toilet, cut plastic shims to fit and slip them underneath (you may have to remove caulk before adding shims). Then caulk around the toilet and snug down the nuts on the bolts. But don’t crank them down super-tight; that can crack the toilet.
Ever wonder why old houses have a random toilet in the basement? Here’s why.
Bang! Goes the Toilet Lid Toilets are responsible for a whole lotta annoying noises. Slow close toilet seats work great at stopping the 'clank' when lowering the toilet seat, but if you still hear the noise of the lid hitting the tank upon opening, here's what you can do. Put a vinyl bumper on the lid of the toilet tank. A toilet seat with a slow-close lid and vinyl bumpers are available at home centers or online. See why you should always close the toilet lid, besides having good manners.
Cracked Toilet Seat Installing a new toilet seat is an easy two-minute job: Just set the seat in place and tighten the nuts. Removing the old seat, on the other hand, can be a frustrating ordeal. Often, the bolts that fasten the seat are so corroded that you simply can’t unscrew the nuts. But there’s no need to explode—we have the solution.
First, take a look at the bolts that secure the seat. If the bolts or nuts are plastic, they can’t corrode and will come off easily. Simply pry open the cover behind the seat to expose the bolt’s head. Unscrew the bolt with a pliers or a screwdriver while you hold the nut underneath with the pliers.
Think your toilet seat is bland and boring, liven things up with one of these mind-blowing toilet seats.
Rusted Bolts If lubricant won’t free the nut, grab your drill, drill bit collection and safety glasses. Using a 1/16-in. bit, drill into the bolt where it meets the nut. Drill 1/4 in. into the bolt. Next, enlarge the hole with a 1/8-in. bit, followed by a 3/16-in. bit. Then try the socket wrench again. Your goal now isn’t to unscrew the nut but to break off the bolt as you turn the nut. If the bolt won’t break, keep enlarging the hole. Eventually you’ll weaken the bolt enough to break it. If you're in search of a completely new toilet, be sure to read our expert tips on how to pick a new toilet.
Sweaty Toilet If summers are humid where you live and you don’t have air conditioning, you’ve probably noticed your toilet “sweating” excessively. Condensation forms on the outside of the tank, which can drip down and make a mess or even rot out your floor. Some toilets are available with insulated tanks to prevent condensation problems.
Ever worried about waking someone up when flicking on the bathroom lights in the middle of the nights? Then this tricked-out toilet will blow your mind.
Bubbling Toilet If you have air bubbles that rise up through your toilet bowl (except when it flushes) or notice the water level rising and falling, you probably have a clogged or improperly vented toilet. This toilet bubbling problem is especially true when you have an appliance like a clothes washer nearby. Your drain line is gasping for air.
When you pour liquid from a can, you’ll notice that it doesn’t flow evenly unless you have a second opening for air. The same holds true for plumbing vent pipe. As water goes down a drain, air is needed to equalize the pressure in the drain line.
This is the purpose of a venting system. If the drain lines in your home have poor venting, water rushing down the drains will pull water from nearby P-traps. The drain in the toilet bowl is basically a P-trap. If the problem just started, it’s probably a blocked drain or plumping vent pipe that needs to be “snaked” out. And since the water in the toilet is dropping and gurgling, it’s likely that the problem is near that area.
Unfortunately, a clogged or missing vent is tough to fix, since it usually requires breaking into the walls to examine the drain system. Unless you have plumbing experience, this project is best left to a professional. That way you can avoid one of these 100 plumbing goofs and other scary things.
Toilet Won't Flush Well Master baths are often distant from the rest of the plumbing in the house, so they often have their own plumbing vents independent of the home’s other plumbing. If the flushing performance is anemic and there are no clogs or obvious malfunctions, there may be an amazingly simple remedy. Occasionally, plumbers forget to remove the temporary plug that’s used to pressure-test the lines after plumbing rough-in. They’re located at the top of the vent pipe up on the roof. If you can’t see a rubber cap clamped on the vent over the bathroom from the ground, climb up on the roof and inspect the end of the vent over your bathroom and I’ll bet you’ll find an overlooked plug. If so, break through the plastic with a screwdriver and pry out the pieces and that toilet will work just fine.
If that isn’t the problem, you probably have a defective toilet or an obstruction in the drain line. Get ahold of the plumber who worked on the house. He or she should be able to solve the toilet wont flush problem. Discover these 9 super-simple toilet tuneups, too.
Sluggish Toilet If your toilet flushes slowly, the rinse holes under the rim may be clogged with mineral deposits. With a mirror and a coat hanger, you can clean out those clogged holes without ever getting your hands dirty. The photo says it all—look into the mirror to see if the holes are clogged. If they are, bend a coat hanger flat and probe the tip into the holes to poke out any mineral deposits.
If you thought some of those toilet seats were crazy, prepare for 50 of the most insane toilets ever created.
Clogged Toilet For about 90 percent of clogged toilets, you only need one special tool: a toilet plunger. Buy a toilet plunger with an extension flange on the rubber bell-shaped end. A toilet plunger with an extension flange is designed to fit toilets better, so you can deliver more “oomph” to the plunge. You could pull a woodchuck from a hole with a toilet plunger with an extension flange. The toilet plunger will unplug sink and tub drains, too, if you simply fold the flange back into the bell. If you can't find a plunger, or never thought to get one, then check out these ways you can unclog a toilet without a plunger.
Toilet Not Caulked Yes, the bathroom is a place to get clean, but it can easily be a place to trap some pretty foul smells. If you don’t caulk a toilet to the floor, you could find yourself smelling leftover residue from smelly mop water, tub water, or even worse, the remnants of your son’s potty training. It wasn't too long ago that indoor plumbing wasn't common, check out how the toilet has evolved through history.
Loose Toilet Seat Tighten a loose or wiggly toilet seat with inexpensive rubber bushings and seat stabilizers. It's a 15-minute fix that'll last for years. Remove the toilet seat nuts and insert the rubber bushings.
Loop the rubber band around the toilet seat and center the stabilizers so they touch the inside rim of the bowl. Drill a starter hole and secure the stabilizers with screws from the kit. Then install a set of toilet seat stabilizers, such as Safe-T-Bumpers ($6 at amazon.com). That’ll eliminate loosening caused by side-to-side movement.
If your toilet is coming up short in other areas, check out some solutions that can improve toilet performance.
Corroded Flush Handle Toilet flush handles are another part of a toilet that can cause toilets to keep running. Often handles are toilet parts that get loose or corroded and no longer pull the flap up or drop it back down properly. It’s an easy repair, but there's a trick to getting the flush handle out. The retaining nut inside the tank is a reverse thread. So, if you’re in front of the toilet, turn the nut to the left to loosen. Then remove the old handle and lever, slide the new handle into place, and thread on the retaining nut. Tighten by turning to the right. Find out why some toilet bowl cleaners aren't as great as you might think.
Rusty Hinges It doesn’t take long for the hinge screws on a toilet seat to rust, and then you have rust dust all over the toilet rim every time the seat slams. To prevent this, all you need to do is dab a little clear nail polish onto the screw heads. If the screws are already rusted, fill the holes with caulk. (Don’t worry—you’ll never have to get at the screws, because you’ll be replacing the whole seat and lid assembly someday.) — Mike Scholey. Next, try these super simple toilet tuneups to get yours performing better.
Disclosure: This post is brought to you by The Family Handyman editors, who aim to highlight products and services you might find interesting. If you buy them, we get a small share of the revenue from the sale from our commerce partners. We frequently receive products free of charge from manufacturers to test. This does not drive our decision as to whether or not a product is featured or recommended. We welcome your feedback. Have something you think we should know about?
https://www.familyhandyman.com/plumbing/toilet-problems-youll-regret-ignoring/
Good Plumbers Provide Quality Workmanship The Best Plumbing Companies Are Highly Regarded We're a full service plumbing company who's able to handle any of your plumbing needs, which includes repair of leaks, maintenance, new installation or all sorts of plumbing work in commercial and residential environments. Tap, tub or toilet… anything you are looking for you can trust us to send out an accredited plumber to take care of everything in a respectful and competent manner. For quick service, call right now or click this link plumbers
Emergencies Potential tasks can run from the minor variety - for instance a leaking tap - to those which are, or may become, devastating. Our plumbers have got the experience, skills and tools to resolve just about any obstacle that you come upon, and they are experts at everything from pipework to leak troubleshooting.
We can speedily take care of any kind of plumbing problem which could cause concern at your house or business premises. For all your plumbing emergencies, get on the phone to us. We've continually got a 24-7 emergency plumber available who'll be dispatched to your home in Vancouver ASAP. Any time of the day or year, you're able to rely on us for fast and attentive assistance in your time of need. We at Pioneer Plumbing recognise exactly how worrying plumbing issues can be, in particular when it is an emergency after normal working periods.
All Sorts of Installations KCs Plumbing boasts a long history of top quality work. Regardless if you wish to get some insulating pipe, or a new tub installed, or you need a complete re-pipe or installation in a residential or commercial property, we've got the ability and the experience to make sure that all jobs are accomplished correctly.
We are also an established leader for upgrading the piping in old properties, a thing we have been working at for a long time, especially in a lot of the splendid houses.
Our dedicated residential and commercial plumbing service is the best choice for either modern homes or heritage homes.
We were made aware of that editorial about faucet repair through a good friend on a different website. Loved our article? Please share it. Let another person find it. Are you aware of somebody who is fascinated about the niche? Please feel free to share it. Sharing is good. Helping others is fun. We recognize the value of reading our article about sewer cleanout. Thanks so much for your time spent reading it.
KCs Plumbing & Heating Ltd
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
Everybody has their own way of thinking in relation to kitchen sink installation.What're your concepts about drain service?
How to Use a Plumber’s Snake A plumber’s snake, or drain auger, is a tool that reaches down into pipes to remove clog-causing blockage. Snakes make up the middle ground between common household plungers and the really big guns. If you’re dealing with a clog too stubborn for your plunger, then a snake is your best chance to clear it out yourself.
Snakes are much more powerful drain-clearers than plungers, but they’re also slightly riskier to use. If you use your plumber’s snake improperly, then you might tear up your pipes or even create leaks. To avoid doing that, it’s important to know how your snake works and how to use it correctly. Here’s everything you should know about using a plumber’s snake.
How does a plumber’s snake work?
what is a plumber's snake?A plumber’s snake is a long, flexible metal cable with a small auger or uncoiled spring on one end and a handle on the other. The auger on the snake looks like a drill bit or a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it. Most home plumber’s snakes are hand-operated, and probably have a rotatable handle or even a crank.
Plumber’s snakes work by entering the drain directly to physically contact and then clear away the obstruction causing the clog. You manually insert the auger end of the snake into the drain and then begin uncoiling by rotating the handle. As the snake uncoils, the auger moves further through the drain pipe, until it breaks through the obstruction.
How do you use a plumber’s snake?
1. Put on some clothes you don’t mind getting dirty and lay some old towels beneath the pipes you’re working on. Depending on the nature of the clog, your snaking procedure could get messy. This is especially important if you end up removing the p-trap.
2. (Optional) Consider removing the p-trap. The p-trap, or p-bend, is the curving piece of pipe beneath the sink. It connects the sink to the greater drain pipe system in your home. The reason it’s curved is to prevent sewer gases from rising through the sink and into the home. P-traps are often made of PVC pipe, though they can also be metal.
You can manually remove the p-trap, either with your hands or with the help of an adjustable wrench. Once you remove the p-trap, you should thoroughly inspect and clean it out. If you find your obstruction, then you won’t have to snake at all! Even if you don’t find anything, removing the trap could make snaking easier.
3. (Optional) Consider removing the trap arm. A trap arm is the part of the pipe between the p-trap and the actual wall pipe. It holds the p-trap in place and may curve again to reach the wall. Look for a plastic or metal nut connecting the trap arm to the wall. If you can find one, loosen it to remove the trap arm. If you can’t, then it’s possible the arm is glued in place; don’t attempt to remove it in that case. Make sure you clean out the trap arm like you did the p-trap once you remove it.
Removing the trap arm gets you as close to the drain pipe as possible. Look inside the drain pipe to look for any obstructions. If you can see the obstruction, try removing it from where you are. If you can’t, you should use your snake.
4. Manually thread the auger head of the snake into the pipe. Insert the head of the snake into either the drain (if you didn’t remove the trap), or the access point on the wall. If you didn’t remove the trap, consider running cold water while you snake.
Don’t force the auger into the drain too hard, or you could damage the drain entrance or pipe. Be patient and make sure the head and cable aren’t too long for the drain you’re trying to snake.
5. Begin uncoiling the snake using the handle. Keep the handle of the snake as close to the entrance of the pipe as possible. The more slack the auger had has, the less force you’re supplying it.
Rotate the handle at a consistent pace. Don’t try to rush it or rotate too slowly. If you feel pressure at any point while the cable moves through the pipe, you may have encountered the obstruction.
6. Upon reaching the obstruction, move the rotate the head back-and-forth and up-and-down. Try to break up the obstruction as thoroughly as possible. Don’t try to jam the auger into the walls of the pipe, however. If you hear scraping noises, then you should stop snaking and re-adjust.
If you think the auger might be stuck in the obstruction, consider pulling the snake out of the pipe. In some cases, the obstruction may come out with it. Continue snaking until you no longer feel resistance and the snake uncoils to its full length.
7. Pull the snake out and re-assemble the sink components. Check the auger head for remains of the obstruction and clean it off. If you removed the trap arm and p-trap, then you should re-install them at this point.
8. Check the sink. The snake should have successfully removed the obstruction and solved the clogging problem. If you still seem to have a clog, then you could try repeating your snaking process again. Just like plunging, however, snaking too much can harm your pipes or drains. If a thorough snaking really didn’t solve your problem, then you should consider calling in the pros.
Snaking is a surprisingly easy and accessible homeowner project. As long as you understand how to use your snake, you should solve your problem without creating new ones.
Sometimes, however, you may not be able to beat that clog, no matter what you try. Don’t despair! After your snake, the next step is to call Mike Diamond. We’ve got the tools and know how to find and break up any clog, no matter how stubborn.
https://mikediamondservices.com/blog/plumbers-snake-use/
Good Plumbers Provide Quality Workmanship The Finest Plumbing Contractors Are Well Known We are a professional Vancouver plumbing company who's able to sort out any of business or home service needs, which includes fixing leaks, installations, maintenance and all kinds of plumbing work in residential and commercial settings. Tap, toilet or tub… no matter what you require you can have faith in us to send an accredited plumber to take care of things in a competent and respectful manner. For fast service, call us today or click on this link plumbing companies
Emergencies Repair tasks can vary from modest issues - like a leaking tap - to major ones that are, or could become, catastrophic. Our committed team of plumbers have got the skills, experience and tools to resolve any kind of challenge that you come across, and they are experts at pretty much anything from leak troubleshooting to re-piping.
We can easily handle any sort of plumbing issue that may cause concern at your house or business premises. For any plumbing emergencies, get on the phone to us. We've got a 24 hour emergency plumber available on call who'll be sent to your premises ASAP. Any time day or night, you'll be able to trust in us for cooperative and fast help whatever you emergency. We at Pioneer Plumbing appreciate precisely how irritating plumbing issues tend to be, in particular when it's an unexpected emergency out of normal working times.
All Types of Installations KCs Plumbing has got a long standing reputation for good quality workmanship. Whether you want to have a nice new kitchen basin or a bit of pipe insulation put in, or you require an installation or a complete re-pipe in a residential or commercial premises, we've got the ability and the working experience to guarantee it is completed to code.
We are furthermore a recognized leader for upgrading plumbing systems in older houses, something we've been doing for quite a while now, most notably in the numerous stunning properties.
Our dedicated residential and commercial plumbing service is the top choice for both modern homes and heritage homes.
I stumbled upon that blog entry on drain service when browsing on the web. Liked our blog? Please quickly share it. Let other people locate it. Do you know about someone else who is excited by the topic? Please feel free to share it. Sharing is caring. Helping people is fun. Thanks for being here. Please check our blog back soon.
KCs Plumbing and Heating Ltd
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
Do you find yourself searching for answers about hot water heater repair?
How to Get Rid of Air in Water Pipes Air in water pipes can lead to some odd sounds. If you are hearing prolonged vibrating or noises that you believe are coming from the water pipes, it may be air in your water pipes. Air in water pipes create noises that last for a while and are there when you haven't used your water recently. Follow these steps to release that annoying air from the water lines.
Step 1
Shut off the main water valve by turning it as far clockwise as it will go. In cooler climates this will normally be in the basement if you have one, or possibly in a closet. In warmer climates the water shut off valve may be on the outside of the house near the water meter.
Step 2
Open all faucets in your home. This will include the outdoor spigot, sink, washing machine, shower and every water connection you may have in your home. Flush all toilets until no more water is in the tank or toilet.This will ensure there is no more water in the home's water lines.
Step 3
Turn the main water supply back on once no more water is coming through any faucets. Do this by turning the main water valve as far as it will go counter clockwise. Allow the water to run until every faucet is no longer sputtering. Flush all toilets until they too have a steady flow of water.
Step 4
Turn the faucets off one by one once there is a steady flow of water coming from all of them. A steady flow of water means there is no longer any air in the water lines.
https://www.hunker.com/12335092/how-to-get-rid-of-air-in-water-pipes
Good Plumbing Starts With Ethical Service We are a professional Vancouver plumbing company who's able to sort out all of home or business service needs, including installations, maintenance, leak repairs and all kinds of plumbing work in commercial and residential properties. Tap, tub or toilet… no matter what you need you can count on us to send a qualified plumber to take care of things in an efficient and considerate fashion. For fast service, call right now or click this link plumbing company
Emergency Plumbing Solutions Prospective repairs can vary from modest issues - like a dripping faucet - to more serious ones that are, or perhaps might become, catastrophic. Our dedicated team of plumbers have got the experience, tools and skills to take care of just about any predicament that pops-up, and they're experts at any plumbing project from leak troubleshooting to re-piping.
We're able to swiftly handle any dilemmas with plumbing that might occur at your house or commercial premises. For any plumbing emergency, don't hesitate to call. We've got an emergency 24-7 plumber available on call and will dispatch to your property ASAP. Every day of the year 24-7, you can trust in us for fast and patient help whatever you emergency. We understand how traumatic plumbing problems are, particularly if it's an emergency outside of the regular working day.
All Sorts of Installations We a KCs Plumbing have got a long standing history of top quality work. It doesn't matter if you need to have a bit of insulating pipe, or a nice new bathroom sink installed, or you require an installation or re-pipe in a residential or commercial building, we've got the skills and practical experience to ensure that every job is completed in line with the guidelines.
We are acknowledged also as leaders in replacing the plumbing systems of older houses, a thing we've been working at for a long time now, most noticably in some of the amazing properties.
Our superb residential and commercial plumbing service is a sensible choice for both contemporary homes and older properties.
I hope you enjoyed our article on plumbing companies. Thanks a lot for taking time to browse our blog post. Enjoyed reading our blog? Please share it. Let someone else locate it. Are you aware of another person who is intrigued by the subject? Do not hesitate to share it. Sharing is good. Helping others is fun. Thanks a bunch for being here. Come back soon.
KCs Plumbing and Heating Ltd
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
