© Copyright Nostre Net
Most great-undefinedrate gantry milling unit side rails are made from steel or cast steel. These guide side rails have scuff marks and ought to be restored, gantry cnc，otherwise the marks will broaden or perhaps modify the device device. When working with equipment device information rails along with other friction sets for a long period, due to the diverse levels of rubbing between your two speak to areas, the surface areas of the rubbing pairs have diverse degrees of wear, which seriously impacts the processing reliability and generation performance. unit tool. For that restoration of device equipment and also other donned components, metal dishes and polymer components are often employed for inlay or replacing, which not only needs plenty of processing and manufacturing, but also calls for handbook scraping of the work surface, and many maintenance operations have got a extended building period of time. .
The worldwide advanced polymer 2211F metallic repair materials is utilized to correct the scuff marks on the rails from the high-undefinedpace gantry milling equipment. It only takes a couple of hours to repair the scratched section of the guideline rail and placed it into use. The restoration process steps are as follows:
1. Prepare the damaged aspect with air-acetylene fire (principal temperature, stay away from surface area annealing), make the oils in the steel surface for several years, after which make it until there is not any kindle.
2. The surface of the scraper is cured with an position grinder, the grinding depth is more than 1 millimeters, the groove is refined down the information rail, and the guide rail is a dovetail groove (as proven from the shape). The drill holes at both comes to an end are deepened to change the force.
3. Clear the outer lining with absorbing natural cotton, acetone or definite ethanol.
4. Use 2211F evenly about the scraped work surface the coating should be slender, standard and completely include the scratched work surface to ensure great adhesion involving the materials as well as the steel surface area, then apply the material for the overall repaired part and hit repeatedly To make sure that the content is filled to the required size to really make it slightly over the top of the rail.
5. The content can fully match the functionality of round the clock at 24oC. To avoid wasting time, the temperature might be increased from the halogen lamp, along with the healing time will likely be reduced by half as soon as the temperatures is increased by 11°C, and also the alleviating temperatures is 70oC.
6. Once the materials is treated, utilize a good sharpening blade or perhaps a scraper to correct the content on top of the surface of the guideline rail to finish the development.
like；
Key Points of Longmen Machining Heart
Where may be the digesting adaptability in the gantry milling equipment
| By | ycbing |
| Added | Nov 26 '21 |
The Wall