Which are the benefits of SMT placement device? from sdafasda's blog



1. Mounting pace

Mounting velocity refers to the installation time of every part within a particular vary, plus the rack is fixed. Chip equipment are at the moment mounted on high-speed pcs. Speed: 0.06-0.03s: Multi-function devices are typically medium-speed equipment. The position pace of QFP is 1-2s, and the placement velocity of chip components is 0.3-0.6s. The present multifunction equipment might also reach in 0.2s. If for high-volume SMT placement, the higher the position velocity, the higher the supply level.JUKI KE-3000 Chip Shooter is a high-speed flexible placement machine that meets your expectation. Enjoy accurate and high speed production today. Get a quote.

In accordance to your IPC9850 normal (the acceptance typical for placement equipment), the position velocity is expressed in CPH, that is certainly, the volume of components positioned in a 200mm×200mm placement region for every hour. Huge factors (such as chip factors and QFPS) are mounted at different speeds. Such as, the mounting speed of chip factors is bigger than or equivalent to 12000 cph, even though the mounting velocity of QFP is larger than or equal to 1800 cph.

2. Absorption charge of factors

Part suction rate refers back to the means to correctly pick and position. Expressed in %, the larger the greater. As an example, the ingredient suction level is 99.9%, that may be, considerably less than 1 element is allowed to be positioned and placed for one thousand factors. A lot less throwing level is definitely the vital to testing product quality for SMT chip processing.

3. Mounting angle

The mounting angle is usually 0° to 360°, as well as the resolution is 0.1° to 0.001°.

Fourth, the mounting location

The location space is determined by the transfer trajectory of your placement equipment plus the movement variety of the placement head. Usually, the least PCB size is fifty mmx50 mm, along with the utmost PCB size ought to be greater than 250 mmx30 mm. The most mounting area of ??equipment of different producers is different. The most PCB measurement from the identical kind of equipment is normally divided into three specs: huge, medium and small.

related articles:

Which are the features of the multifunctional placement equipment? Occur consider a glance! 


Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment