lan and wan from kumarfield's blog

In a LAN different cables can be used to physically connect different devices together. However, it’s far more popular to use wifi to connect the different technology and ensure that a fully integrated network is built up. These are the 5 steps needed for a successful LAN implementation.


WANs Explained

This is also known as a Wide Area Network. It’s used to connect devices that are far from another. It’s quite common for a WAN set up to be far more complex than a LAN. Essentially, you start with a LAN and then use the WAN to connect multiple LAN networks to one another. Ultimately, this means that offices can be connected and this typically occurs through public networks.


Speeds. Generally, it will be easier to boost speed levels and reach higher speeds in a LAN network compared to a WAN. This will depend on the hardware and cables used but because you can connect devices physically, it can be incredibly rapid. LAN devices can also be connected to the same router or switch which again does mean faster connections.


In contrast, WAN speeds can be impacted by various issues. You need to think about the equipment you are using but it will also depend on the equipment used in the network itself. You won’t typically have any control over this and WANs will be slower due to the distance data will have to travel. Technology is changing all the time and high-quality copper cables are used to speed up WAN connections.


Security. Generally, it is true to say that LANs are far safer than WANs. The reason for this should be fairly obvious. Since LANs are smaller in size and scope, it’s less likely for an issue to develop or for something like a virus to access the network. In contrast, WANs are far wider with a higher level of interconnectivity. As such, there is always going to be a greater chance that something goes wrong. That’s why when using a WAN it’s crucial that you do have the right set up to protect the individual systems and the network itself.

lan and wan


Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment