Plumbing Service Companies Near Me from Lisbeth Mckendry's blog

They are making a number of good pointers on drain service as a whole in the article followed below.

5 Main Types of Plumbing Pipes Used in Homes Whether hiring a plumber or taking on a do-it-yourself plumbing project, the experience can be confusing because of the choice of several types of plumbing pipes. Eventually, pipes' uses tend to blend together. Which type of pipe should be used for water supply, drainage, sewer, and even for the exterior? The answer is not as clear as it may have been in the past when the main pipes of choice were galvanized steel or cast-iron.     PEX Pipe PEX, or cross-linked polyethylene, pipe is one of the newest and most popular pipes to hit the plumbing market. PEX is used only to supply water. PEX is a pipe that is rigid enough to withstand the pressures of water supply but flexible enough to weave throughout walls, ceilings, basements, and crawlspaces. PEX has truly delivered water-supply plumbing into the hands of do-it-yourselfers and professional plumbers.   Pros

• Color-coded red for hot water and blue for cold water
• Highly flexible, with 90-degree curves possible
• Attaches with push-fit plumbing fittings, among other types
• Inexpensive
• Able to join with copper pipe
• Cuts easily

Cons

• Long-term capabilities untested
• May leak with push-fit plumbing fittings
• Cannot be recycled

    PVC Pipe PVC, or polyvinyl chloride, pipe is a drain or vent line type of plumbing pipe. PVC initially gained popularity because it was lighter and easier to work with than traditional galvanized steel pipe. PVC pipe is moderately easy to install and requires little more than a hacksaw and a miter box to cut. PVC glues together with solvents.   Pros

• Diameters clearly marked on the white surface of the pipe
• Inexpensive and can be used for long runs such as for irrigation
• Easier to work with than steel or copper

Cons

• The pipe cannot be unjoined and must be cut
• Glued pipes can be prone to leaking
• Degrades in sunlight

    Rigid Copper Pipe Rigid copper is often used for water supply lines within the home. Rigid copper is easily cut with a hacksaw or with a special copper tube cutter. The connection is a different matter, as it requires a practiced hand to solder copper pipe together. Rigid copper pipe is great for water supply because it does not come with any health risks.   Pros

• Though it is called rigid, this pipe can be slightly bent
• Handles heat well
• Stands up against intense pressures
• Easy to recycle and waste copper pipe even has monetary value

Cons

• Difficult for do-it-yourselfers to work with due to soldered connections
• Expensive
• Develops pinhole leaks
• Inside of pipe may eventually corrode and impede water flow

    ABS Pipe ABS (acrylonitrile butadiene styrene) pipe is mainly used as a vent and drain line. ABS pipe looks very much like PVC pipe, except that it is black and slightly softer.   Pros

• Stronger than PVC pipes
• Good for underground exterior use
• Works well in cold temperatures

Cons

• Often not permitted by building code
• Warps and deforms at certain temperatures

    Flexible Copper Pipe Flexible copper pipe or tubing is used for final runs to water heaters, refrigerators, and some sinks. Flexible copper is used only for short runs and can be cut with ease with a hacksaw. It can be bent to fit around corners.   Pros

• Fits in tight, unusually shaped areas
• High heat tolerance

Cons

• Expensive
• Thin and prone to breaking

    Galvanized Steel Pipe and Cast Iron Two additional types of pipe are sometimes found in older homes and are infrequently installed, especially by do-it-yourselfers: steel and cast iron pipe.   Galvanized steel pipe was used for decades for drainage, water supply, gas supply, and any number of other purposes. While galvanized steel pipe is still around (particularly for gas supply) it is far less used and is never used for water supply in new construction or remodel projects. Each end of the pipe is threaded, and individual pipes are screwed into each other with connecting joints.   Cast iron pipe was often used for sewer and other drainage purposes. Cast iron pipe is still found in many homes. Cast iron pipe is viable until the point that it rusts completely through. Cast iron is very heavy and difficult to cut. Retrofits tend to replace cast iron pipe with rigid plastic pipes such as ABS.   Pros

• Galvanized steel pipe has the advantage of being extremely strong.

Cons

• Galvanized steel pipe eventually corrodes and blocks water flow.
• Some galvanized steel pipe may pass lead into the water supply.

https://www.thespruce.com/basic-types-of-plumbing-pipes-1822487

Leaky Faucet Repair Contractors Near By

There are two things that come into your head when plumbing work is required. Should you contact a professional for help, or simply handle it yourself? Any time you need a plumber, contact us plumbing services

A heating professional can carry out the work if the plumbing issue involves gas. If an inspector will check out the work, it is more likely to pass if it’s serviced by a licensed professional. And if you determine to do it without assistance, will you be confident your own work will pass if checked out by an inspector? To ensure the work is carried out safely and correctly, get the plumbing service done by professionals. Call them for quotes.

Local Plumbing Contractors: How to Look for Them

Nearly all plumbers prefer to work close to home and will promote in local neighborhood papers or your daily paper at times. Of course, the social media can help you on that aside from the Yellow Pages. Another approach to locate these guys is to search the web and include your community in the search term "plumbing" or "plumber". EG: plumber Vancouver. You can tell an excellent plumbing company by its well-designed web page. This shows who they are in giving services.

Find out more About Call-Out Charges

When you have called a plumber, many of them usually give you a quote for a certain job. When they arrive in person anticipate a "call-out fee" if you decide against hiring the guy. Plumbers don't like doing that and would prefer to do the work than charge you a call-out payment, but time and gas is involved with a house call, therefore a call-out fee is common practice.

Plumbing pipes are made to last a long time. You could question them if they will be sending a journeyman and they will inform you if that job even requires that level of expertise.

Simple Maintenance Does Help

While the plumber is there, ask what you can do to prolong the life of your furnace or maybe the hot water tank. A few simple things can be done like figuring out how often the filter must be changed or is it good to have a better quality air filtration system.. In case you have radiant heat that has its own schedule for upkeep. It’s good to have appropriate scheduling of maintenance to your major home appliances.

The suggested schedule to examine a gas furnace is every two years. You could also lengthen the life by checking the water tank also.

Shamrocks Plumbing and Heating
1325 Elwyn Rd, Kelowna BC, V1X 5M9
Ph: (250) 575-8138